This is a 3D Printed kit of King's weapon, Chastiefol, from the Seven Deadly Sins. All parts needed for assembly are included, such as the PVC pipe and threaded rods. Parts will need to be sanded if you want it to be smooth. Color may vary depending on what plastic I have on hand.
The overall height of the prop is ~79 inches [6foot 7inches] (2015mm). The height can be adjusted to whatever height you need, just make a note of it in the order or send me a message.
Printed with ABS plastic.
Parts Included:
- Two 1/4" threaded rods (pre-installed)
- Two 1/4"-20 Internal Threads, 0.789" Length threaded inserts (pre-installed)
- One 23" long 1/2" schedule 40 PVC pipe
- One 17" long 1/2" schedule 40 PVC pipe
- One 1/2" pvc pipe coupler (pre-installed)
- 3D printed parts
Parts can be glued together with super glue or epoxy.
Instructions on assembly are included.
I run the parts through an acetone vapor bath to melt the print lines and make the parts smooth. This vastly cuts down on the amount of on sale sanding needed by 75% or more. This does NOT mean that no sanding is required. I do recommend a light sanding with a high grit sand paper (220+) before priming to give the paint a better grip.
This product can take 1-2 weeks to prepare (3D print), depending on how many other orders I am currently processing.
Product code: Chastiefol - Seven Deadly Sins- on sale 3D Printed Kit